The decoder it is use to convert RS485 signal to control the PTZ camera.
- Lens Control - Zoom, Focus, Iris
- Pan/Tilt - Up, Down, Left Right
- RS485 interface with baud rate select
- Output Pan/Tilt Control Voltage : AC24V
- For Pan/Tilt/Zoom Camera System
- Support Different DVR System
- With pan tilt, it can make 128 very precise per-set position
- A programmable auto cursing line (recycle call per-set position from 1-10, pause time is 5 seconds. With this function, the pan tilt auto cruising function will be replaced.)
- Mechanical signal adjust technology, it completely solve the problem of imprecise positioning after movements
- Position accuracy: < 1 degree
- Accumulative deviation: auto cursing, < 2 degree / 24 hours.
- Can control pan tilt, lens, windshield wiper, light, etc.
- Protocol: PELCO-D, PELCO-P. Baud rate: 1200, 2400, 4800, 9600 optional
- RS485 bus, max. transmit distance 1200M, Antistatic, thunder proof
- AC 24V power supply, integrated 10W switch power module, provide DC12V-500mA camera power supply
- Smart power management technology, it can auto allocate power voltage, when the power consumption is relatively low, it will give voltage to other device.
Packing size: 150*110*40mm/6*4.3*1.7inch 214g
Product dimension: 100*80mm/4*3.1inch 106g
We suggest you to buy the below product with the decoder
RS485 signal cable
Wireless RS485 transmitter (If you need, please contact us)
- 1X Decoder
- 1X Signal cable